The 919E-30-46-10K pyroelectric energy detector comes with a removable diffuser based attenuator for high energy YAG and erbium lasers. It has a 46 mm aperture with diffuser out and 33mm aperture with diffuser in. It can measure energies from 10 µJ up to 30 J. It can operate at repetition rate..
$0.00
Ex Tax:$0.00
The 70714 Sample Bias Amplifier is optimized for Quantum Efficiency (QE) measurements where an external light source and/or voltage source is used to bias a sample cell under test. Both types of sample biasing can be accomplised with this amplifier, as well as measuring both AC and DC components of ..
$2,434.00
Ex Tax:$2,434.00
The 819M-SAM-1.0 Sample Holder attaches to a 1 inch port on a 819C or 819D Series integrating sphere. It holds the sample external to the integrating sphere...
$595.00
Ex Tax:$595.00
The CA-150 SC Fiber Optic Connector Adapter accommodates optical fibers terminated with SC connectors. The CA-150 is compatible with the following ILX Lightwave optical power and fiber optic power meter measurements heads: FMH-8705, FMH-8715, FMH-87107, OMH-6790B...
$239.00
Ex Tax:$239.00
The FP4-SC Fiber Connector Adapter accommodates optical fibers terminated with SC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detector..
$131.00
Ex Tax:$131.00
The 919E-20U-10-20K photodiode energy detector is for low energies and has a 10 mm diameter aperture. It can measure energies from 1 nJ to 15µJ. It can operate at repetition rates up to 20 kHz and covers the spectral range from 0.19 - 1.1 µm. The sensor comes with a standard 1.5 meter ca..
$0.00
Ex Tax:$0.00
The 818-SL/DB Silicon (Si) Photodetector is supplied with a NIST traced calibration report that details individual detector responsivity measured with and without attenuator. Exclusive OD3 attenuator technology extends the calibrated optical dynamic range of our photodiode sensor heads by three deca..
$534.00
Ex Tax:$534.00
The 918D-SL-OD1R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD1 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$656.00
Ex Tax:$656.00
The 918D-SL-OD2R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD2 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$709.00
Ex Tax:$709.00
The 918D-SL-OD3R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$600.00
Ex Tax:$600.00
The 919P-020-12 Thermopile Sensor is a general purpose laser power sensor measuring laser power up to 20 W, when it is heat sinked to chassis. It can handle up to 4 watts when it is used free standing. It's spectrally flat coating covers the wavelength range 0.19 to 11 μm (BB type coating). It ha..
$1,104.00
Ex Tax:$1,104.00
The 819M-SM1-1.0 is an adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere with an SM1 (1.035-40) thread. Use this part to connect to a broad range of Newport’s Lens Tube fixtures...
$265.00
Ex Tax:$265.00