National Instruments PC-DIO-24 Digital I/O Card Features 2-Wire Handshake Capability User-Defined Power-Up State Unidirectional and Bidirectional I/O 24 lines (5 V/TTL) Static I/O in 8-Bit Ports The National Instruments PC-DIO-24 device is a 24-bit parallel DIO interface for ISA and is designed f..
National Instruments DAQ M Series Multifunction for USB Features Up to 80 Analog Inputs at 16 bits, 1.25 MS/s (1 MS/s or 750 KS/s Scanning) Up to 4 Analog Outputs at 16 bits, 2.8 MS/s (2 µs full-scale settling) Up to 48 TTL/CMOS Digital I/O Lines (Up to 32 Hardware-Timed at Up to 1 MHz) Two 32-bit..
The CA-250 Bare FC Ferrule Fiber Optic Connector Adapter accommodates optical fibers terminated with Bare FC Ferrule connectors. The CA-250 is compatible with the following ILX Lightwave optical power and fiber optic power meter measurements heads: FMH-8705, FMH-8715, FMH-87107, OMH-6790B...
The CA-120 Bare Fiber Adapter Ring Adapter is required to interface the patented ILX Lightwave BF-820 Bare Fiber Holder to the following ILX Lightwave optical power and fiber optic power meter measurements heads: FMH-8705, FMH-8715, FMH-87107, OMH-6790B..
The 466A-710 Double Arm Bare Fiber Holder has double V-grooves for repeatable fiber placing. Two clamp arms with 25 to 125 g adjustable clamping force swing clear of V-groove for easy loading and unloading of the fiber. Compatible with the 466A Series Flexure Stages...
The 70710 Current Preamplifier is a low noise current to voltage amplifier designed for photomultiplier tubes or photodiodes operating in photovoltaic mode, such as unamplified detector models 71650 and 71653.For power, use the provided power cable to connect to an external power supply for the nece..
The CA-100 FC Fiber Optic Connector Adapter accommodates optical fibers terminated with FC connectors. The CA-100 is compatible with the following ILX Lightwave optical power and fiber optic power meter measurements heads: FMH-8705, FMH-8715, FMH-87107, OMH-6790B...
The FMH-87107 Fiber Optic Measurement Head is an integrating sphere based measurement head compatible with the FPM-8220 Fiber Optic Power Meter. The FMH-87107 is designed to measure optical power from -60 dBm to +30 dBm over a wavelength range of 800-1650nm. Interchangeable fiber optic adapters allo..
The HPM710-50 HPFTM Fluorescence Bandpass Filter is 25.0 mm diameter, 3.5 mm thick band pass filter with nominal center wavelength at 710 nm and nominal bandwidth of 50 nm. It is manufactured to provide maximum performance delivering exceptionally high passband transmission (≥ 90%) and enhanced e..
The HPX710-50 HPFTM Fluorescence Bandpass Filter is 25.0 mm diameter, 4.3 mm thick band pass filter with nominal center wavelength at 710 nm and nominal bandwidth of 50 nm. It is manufactured to provide maximum performance delivering exceptionally high passband transmission (≥ 90%) and enhanced e..
The HPD635 HPF™ Series Fluorescence Longpass Dichroic Filter is manufactured to provide maximum performance delivering exceptionally high transmission (≥ 93%) from 647 - 710 nm and high reflectance (≥ 95% from 575- 626 nm. This rectangular shaped dichroic filter is 25.5 x 36.0 mm with a nomina..
The 710 Temperature Controlled Laser Diode Mount provides a convenient mounting solution for the most demanding laser diode control in the laboratory. Direct access to the laser TO-CAN window is possible on this laser diode mount, for both the TO-9 (9 mm) and TO-56 (5.6 mm) type packages. Collimatio..