description: M Series Multifunction DAQ 32 analog inputs (18-bit); 625 kS/s single-channel (500 kS/s aggregate). 4 analog outputs (16-bit, 2.8 MS/s); 48 digital I/O (32 clocked); two 32-bit counters. Generic 34- and 50-pin connectors for easy integration. NI Signal Streaming technology for sustained..
The AO120 Bare Fiber Adapter Ring Adapter is required to interface the patented ILX Lightwave BF-820 Bare Fiber Holder to the following ILX Lightwave optical power and fiber optic power meter measurements heads: OMH-6703B, OMH-6708B, OMH-6727B, OMH-6742B.Note: AO270 not included...
The BF-820 Bare Fiber Holder is compatible with both ILX Lightwave and Agilent adapter rings and is designed to hold and position a common telecom fiber. Inside the BF-820, opposing V-guides facilitate correct fiber positioning. Outside, textured finger grips enable single-handed maneuvering of the ..
The 10CM00SB.1 is a Broadband Super Mirror, 25.4 mm in diameter, 6.35mm thick, and coated to have a reflectivity of > 99.9%, 0-45 °, from 485 to 700 nm.Broadband SuperMirrors™are extremely high performance dielectric mirrors. They are produced with ion beam sputtered (IBS) coatings on super polished..
The 10CMR-45 Cold Mirror is a 25.4 mm diameter 45° mirror used as a heat control filter. . Our cold mirrors are heat-transmitting filters designed to reflect 400-700 nm visible wavelengths while transmitting 780-2500 nm near-infrared wavelengths. These filters can be used to remove heat from an opti..
The 20CMR-45 Cold Mirror is a 50.8 x 50.8 mm square 45° mirror used as a heat control filter. Our cold mirrors are heat-transmitting longpass filters designed to reflect 400-700 nm visible wavelengths while transmitting 780-2500 nm near-infrared wavelengths. These filters can be used to remove heat ..
The AO271 FC Fiber Optic Connector Adapter accommodates optical fibers terminated with FC connectors. The AO271 is compatible with the following ILX Lightwave optical power meter measurements heads: OMH-6703B, OMH-6708B, OMH-6727B, OMH-6742B...
The 10Q20UF.HR20 FemtoOptics Ultrafast Mirror is 25.4 mm in diameter and 6.35 mm thickness, λ/10 flatness, and 10-5 schratch dig. Designed for near normal angle of incidence to have high reflection at 267 nm, these mirrors are ideally suited for the distortion free steering of sub 20 femtosec..
The FemtoOptics Ultrafast Mirror is 25.4 mm in diameter and 6.35 mm thickness, λ/10 flatness, and 10-5 schratch dig. Designed for 0 degrees angle of incidence to have high reflection at 400 nm and high transmisison at 800 nm, this mirror can have a double use of being a dichroic beamsplitter ..
The 10Q20UF.HR25 FemtoOptics Ultrafast Mirror is 25.4 mm in diameter and 6.35 mm thickness, λ/10 flatness, and 10-5 schratch dig. Designed for 45 degrees angle of incidence to have high reflection at 267 nm for S and P polarizations, these mirrors are ideally suited for the distortion free st..
The FemtoOptics Ultrafast Mirror is 25.4 mm in diameter and 6.35 mm thickness, λ/10 flatness, and 10-5 schratch dig. Designed for 45 degrees angle of incidence to have high reflection at 400 nm and high transmisison at 800 nm, this mirror can have a double use of being a dichroic beamsplitter..
The 10B20EAG.2 Femtosecond Optimized Silver Mirror is 25.4 mm in diameter, 6.35 mm thick, and broadband optimized for 470 - 1000 nm. This ultrafast mirror is designed for zero to 45 degrees angle of incidence for S and P polarization. The absolute value of GDD is an astounding less than 5 fs2 from 5..