National Instruments 10 A / 200 mA Current Shunt Modules (CSMs) Features Measures up to 200 mA and 10 AFeatures a Field Replaceable Fuse, Easily AccessiblePlugs Into Any Standard Banana ConnectorPlugs Directly Into the DMM Banana Connectors, No Cable Required The National Instrument 10 A and 200 ..
The PAC10AR.15 Broadband Achromatic Lens is a 345 nm to 700 nm anti-reflection coated, 0.49 inch (12.5 mm) diameter, N-FK5 and F2 achromatic doublet lens with an effective focal length of 25.0 mm. This achromat is computer optimized to provide diffraciton limited performance for polychromatic illumi..
The 910A Compact Five Axis Spatial Filter has a space-efficient design combining five-axis alignment with high stability for set-and-forget adjustment. Precise XY translation of the pinhole plus true gimbaling of the entire assembly are achieved with precision 100 TPI screws with new knobs including..
The Oriel® PVIV-10A Test Station runs I-V measurements and calculates critical parameters such as short circuit current (Isc), current density (Jsc), open circuit voltage (Voc), fill factor (ff), maximum output power (Pmax), cell efficiency (η), and other standard photovoltaic cell parameters. The s..
The LDX-36010-12 High Power Laser Diode Driver is a 10A and 12V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36010-12 can output up to 20A at 12V. In addition the LDX3601012 features 4-wire voltage measurement, photodiod..
The LDX-36010-35 High Power Laser Diode Driver is a 10A and 35V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36010-35 can output up to 20A at 35V. In addition the LDX3601035 features 4-wire voltage measurement, photodiod..
The 910PH-1 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 1 ± 0.5 μm diameter hole with extremely low ellipticity is ..
The 910PH-10 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 10 ± 1 μm diameter hole with extremely low ellipticity is ..
The 910PH-100 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 100 ± 5 μm diameter hole with extremely low ellipticity i..
The 910PH-15 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 15 ± 1.5 μm diameter hole with extremely low ellipticity i..
The 910PH-20 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 20 ± 2 μm diameter hole with extremely low ellipticity is ..
The 910PH-25 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 25 ± 2.5 μm diameter hole with extremely low ellipticity i..