These SP-0.063-S-10 Miniature Optical Pedestal Spacers have a 0.063-in. thickness and a 0.5-in. (12.7-mm) diameter. With these super-slim spacers, getting SP or SP-Z optical posts closer to your exact optical height without sacrificing stability is now possible. Made from Stainless Steel these space..
These SP-0.031-S-10 Miniature Optical Pedestal Spacers have a 0.031-in. thickness and a 0.5-in. (12.7-mm) diameter. With these super-slim spacers, getting SP or SP-Z optical posts closer to your exact optical height without sacrificing stability is now possible. Made from Stainless Steel these space..
These SP-0.25-S-10 Miniature Optical Pedestal Spacers have a 0.25 in. thickness and a 0.5 in. (12.7-mm) diameter. With these super-slim spacers, getting SP or SP-Z optical posts closer to your exact optical height without sacrificing stability is now possible. Made from Stainless Steel these spacers..
These SP-0.125-S-10 Miniature Optical Pedestal Spacers have a 0.125-in. thickness and a 0.5-in. (12.7-mm) diameter. With these super-slim spacers, getting SP or SP-Z optical posts closer to your exact optical height without sacrificing stability is now possible. Made from Stainless Steel these space..
The VPHV-A Brass Threaded Insert can be threaded into the bottom of our VPHV composite optical post holders to provide a 1/4-20 threaded hole for attachment directly to an optical table or breadboard. Package of 10 threaded inserts...
The LT10-SP05-PK is a set of 10 black acetal rings sized to fit into LT10 and LH-1A 1-in. lens mounts. These washers are 0.5-mm thick and have a thin-wall design to maintain a 90% clear aperture. The Acetal material is a low-friction, high-strength engineering plastic ideally suited as a protective..
The SPH-1 is a slimmed-down, low-cost post holder for 1/2 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The SPH-1.5 is a slimmed-down, low-cost post holder for 0.5 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ..
The SPH-2 is a slimmed-down, low-cost post holder for 0.5 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The SPH-3 is a slimmed-down, low-cost post holder for 0.5 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The SPH-4 is a slimmed-down, low-cost post holder for 0.5 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The PHB-25 is a slotted base designed to provide mounting for the SPH series of slim post holders. It has an open slot to allow greater maneuverability in tight spaces and with its threaded hole, it can also be used as a table clamp for securing plates or breadboards to an optical table...