The 70055 Adapter Cable has a 3-pin banana connector on one end ands a 5 pin Mini DIN on the other. It is used to connect an amplified Oriel detector to Oriel's Lab Power Supply models 70703 and 70709. The Adapter Cable supplies the power required by the built-in detector amplifier...
The 10B20NC.1 Broadband Beam Sampler is a 1.0 inch (25.4 mm) diameter, 6.10 mm thick, N-BK7 beam sampler with a λ/10 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel reflection for..
The 20B20NC.1 Broadband Beam Sampler is a 2.0 inch (50.8 mm) diameter, 9.40 mm thick, N-BK7 beam sampler with a λ/10 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel reflection for..
The 10Q20NC.1 Broadband Beam Sampler is a 1.0 inch (25.4 mm) diameter, 6.10 mm thick, UV fused silica beam sampler with a λ/10 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel refl..
The 10Q40NC.1 Broadband Beam Sampler is a 1.0 inch (25.4 mm) diameter, 6.10 mm thick, UV fused silica beam sampler with a λ/20 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel refl..
The 20Q20NC.1 Broadband Beam Sampler is a 2.0 inch (50.8 mm) diameter, 9.40 mm thick, UV fused silica beam sampler with a λ/10 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel refl..
The 20Q40NC.1 Broadband Beam Sampler is a 2.0 inch (50.8 mm) diameter, 9.40 mm thick, UV fused silica beam sampler with a λ/20 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel refl..
The CBL-70054-LIDA is a replacement cable used with the LIDA-SRS-KIT Lock-In Digital Amplifier. It connects an amplified Oriel detector to the Preamp connector on the back of the LIDA. This provides power to the detector's amplifier. Note that a BNC signal cable is also required for the detector...
The 67017 Condensing Lens Assembly is for use with the 60000 Q Series lamp housing. It is included with the 66878 and 66508 Preconfigured Q Series light source systems. The Q Housing is known for its flexibility and ease of configuration. This Condensing Lens Assembly can be purchased separately ..
The 67008 Condensing Lens Assembly is for use with the 60000 Q Series lamp housing. It is included with the 66877 and 66507 preconfigured Q Series light source systems. The Q Housing is known for its flexibility and ease of configuration. This Condensing Lens Assembly can be purchased separately ..
The 70710 Current Preamplifier is a low noise current to voltage amplifier designed for photomultiplier tubes or photodiodes operating in photovoltaic mode, such as unamplified detector models 71650 and 71653.For power, use the provided power cable to connect to an external power supply for the nece..
The CC-370 Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-370 cable used 8 gauge wire for increased current capacity and is terminated at one end for quick and easy connection to ILX Lightwave's LDX-36000 High Power Precision Current Source. #1..