National Instruments Miscellaneous Hardware, Circuit Boards, and Parts Features Miscellaneous Parts Wide Range of Equipment This page is a list of National Instruments miscellaneous parts spanning all categories...
National Instruments VXI-1500 Mainframe Features Auto Bus Grant Daisy-Chaining (No Backplane Jumpers Required)1100 W (115 VAC Input) or 1420 W (230 VAC Input) of Available Power1100 W of Heat Dissipation by Filtered Forced-Air CoolingUniversal AC Input: Auto-Voltage and Auto-Frequency RangingOver-..
The X48-1.5 Aluminum Rail is a solid piece of aluminum, forming a rigid, yet lightweight, 1.5 m length foundation for building larger precision optical systems. X48's symmetrical cruciform cross-section provides four parallel mounting surfaces and permits carriers to be mounted to any side of the ra..
The X95-1.5 Aluminum Structural Rail is a cylindrical aluminum extrusion with four longitudinal reinforcing ribs. This 1500 mm length rail has 10 mm thick ribs, providing four symmetrical dovetail clamping surfaces for carriers and significantly increase the longitudinal and torsional rigidity of th..
The F-HB1500G Polarization Maintaining Fiber with Reduced Cladding uses 80 um cladding polarization maintaining (PM) optical fibers, as opposed to 125 um cladding diameter. It is designed for optimal performance in fiber optic gyroscopes, sensors, and telecommunication component applications. The re..
The F-HB1500T-245 Bow-tie Polarization Maintaining Fiber is a polarization preserving fiber specifically made to be compatible with standard telecom fibers and PANDA™ PM fibers. Splicing these fibers to PANDA™ fibers routinely results in a splicing loss of..
The F-HB1500 Polarization Maintaining Fiber uses Fibercore's Bow-Tie polarization maintaining (PM) fiber technology. This highly birefringent (HiBi) fiber, is optimized for operation between 1550 - 1650 nm and has a beat-length of less than 2 mm. The beat-length, the length over which the fiber pola..
The F-DF1500Y Erbium-Ytterbium Co-doped Optical Fiber has exceptionally high ytterbium concentration and its patented, phosphorous-doped core. The ytterbium level creates a very broad and intense pump-band-enabling the use of a wide range of high power pump sources. The phosphate host-glass of the c..
The LDC-3916376 Combination Laser Diode Controller Module offers both a 1500 mA laser diode driver, and a 9 W TEC controller in the same module.The module provides high stability, low noise output with multiple hardware current limits and laser protection features such as intermittent contact protec..
The 74171 Double Grating Assembly is designed for installation into the Oriel Cornerstone 260 monochromators and MS260i imaging spectrographs. This 50 x 50 mm grating comes bonded to a double grating mount, allowing it to be one of two gratings installed inside the instrument. The grating efficiency..
The F-SMM900 Passive Dual-Clad Fiber is a passive, dual-cladding, Multi-Mode (MM) fiber that combines both Single-Mode (SM) and multi-mode fiber characteristics within a single fiber. The fiber has a germano-silicate single-mode core, a pure silica inner cladding to guide the pump light and a fluori..
Er and Yb co-doped dual-clad fiber. Ytterbium is widely used for high power fiber laser applications because it is highly soluble in typical optical fiber core matrices with the result that single mode absorption figures as high as a thousand dB per meter or greater may be achieved without adversely..