The PS-4E-T Precision Ground Stainless Steel Optical Pedestal Extention is 1.0 in. diameter with a 4.0 in. height and 1/4-20 threads at each end. These posts can be used with the PS-1P Peg Adaptor, PS-B Pedestal Base or the PS-T Spacers. The PS-T series Post and Peg System features the unique Peg Ad..
The PS-4E Precision Ground Stainless Steel Optical Pedestal Extention is 1.0 in. diameter with a 4.0 in. height and 8-32 threads at each end. Optical pedestal extensions and spacers allow for many in between optical pedestal mounting heights. One mounting screw is included and pre-installed...
The Q-TMS-4 Optical Pedestal Post Holder with Clamping Fork provides a means to hold and adjust the PS series Pedestal and Extension Posts. This 4 inch height holder for 1 inch diameter pedestal posts includes a clamping fork to allow mounting anywhere on an optical table. These holders are ideal fo..
For use with the SR-SC sliding clamp, the SR-4P is a special purpose extension rod. It features a “V” groove running axially down the length of the rod and includes Newport’s patented peg fastener. The “V” groove allows the SR-SC sliding clamp with its spring-loaded ball detent to ride linearly al..
The 8824-AC provides the precision and stability of the Picomotor actuator utilizing the ULTIMA Kinematic Optical Mount. It provides smooth, reliable motorized adjustment along with carbide pads, thick front and rear plates and optimized, stiff springs to improve the long-term stability and provide ..
The 625-RC4 Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 4 inch (101.6 mm) diameter mirrors. It is compatible with Newport's rod models 40, 41, and 45 and incorporate the same stable kinematic design as our 600A Series ..
The 625-RC4-M Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 4 inch (101.6 mm) diameter mirrors. It is compatible with Newport's rod models 40, 41, and 45 and incorporate the same stable kinematic design as our 600A Serie..
The SPH-4 is a slimmed-down, low-cost post holder for 0.5 in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The SPH-4 is a slimmed-down, low-cost post holder for 1/2-in. diameter SP-Series posts. The combination of a 25% reduction in the outer diameter and set-screw post clamping make this SPH post holder the slimmest post holder available today. The SPH posts have clearance holes in the base so they ca..
The 9961 Fixed Height Stainless Steel Optical Pedestal Risers can make the difference between a stable setup and one that suffers from vibrations. This 1.0 in. diameter pedestal is 4.0 in. tall and has 8-32 threads...
The PS-4 Precision Ground Stainless Steel Optical Pedestal maintains long-term optical system alignment. This 1 inch (25.4 mm) diameter post has a 4 inch (101.6 mm) height. Each post is marked with an index groove every 1 in. (25.4 mm) for a quick height reference. Cross-drilled holes allow 3/16 inc..
The 8824-AC-UHV provides the precision and stability of the Picomotor actuator utilizing the clear edge ULTIMA Kinematic Optical Mount. It can now be used in UHV environments (10-9 Torr) as well as for VUV/EUV applications. It provides smooth, reliable motorized adjustment along with carbide pads, ..