The 9131-M Singlemode Fiber Positioner Kit includes the high resolution, high stability Model 9091 fiber positioner, an adjustable microscope-objective holder, and adapters for mounting FC and ST connectorized fibers. An M4 threaded mounting hole allows placement on any post or pedestal in your lab...
The SMF-28-C-10FCA Single Mode Fiber Patch Cord is 10 meter in length and has FC/APC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm o..
The SMF-28-C-10FC Single Mode Fiber Patch Cord is 10 meter in length and has FC/UPC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm ou..
The SMF-28-C-1FCA Single Mode Fiber Patch Cord is 1 meter in length and has FC/APC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm out..
The SMF-28-C-1FC Single Mode Fiber Patch Cord is 1 meter in length and has FC/UPC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm oute..
The SMF-28-C-3FCA Single Mode Fiber Patch Cord is 3 meter in length and has FC/APC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm out..
The SMF-28-C-3FC Single Mode Fiber Patch Cord is 3 meters in length and has FC/PC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm oute..
The SMF-28-C-5FC Single Mode Fiber Patch Cord is 5 meter in length and has FC/UPC connectors at both ends. It uses Corning's F-SMF-28 single mode fiber for operation at 1310/1550 nm. This fiber patch cord has a 900 μm jacket surrounded by a layer of Aramid yarn for extra protection. A 3 mm oute..
The F-SA-C-10FC Singlemode Fiber Patch cord has a 10 meter length and has FC/UPC connectors at both ends. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-index fiber has a uniform core re..
The F-SA-C-1FCA Singlemode Fiber Patch cord has a 1 meter length and has FC/APC connectors at both ends. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-index fiber has a uniform core ref..
The F-SA-C-1FC Singlemode Fiber Patch cord has a 1 meter length and has FC/UPC connectors at both ends. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-index fiber has a uniform core refr..
The F-SA-C-3FCA Singlemode Fiber Patch cord has a 3 meter length and has a FC/APC connector at one end and bare fiber at the other end. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-ind..