National Instruments PXI-8464 Series Controller Area Network (CAN) Interfaces Features Philips SJA1000 CAN Controller and ISO 11898 Physical Layer100 Percent Bus Load Receiving Capability up to 1 Mbit/sHardware Timing for Accurate Timestamping and SynchronizationHigh-Speed, Low-Speed, or Single-Wi..
$0.00
Ex Tax:$0.00
National Instruments PCMCIA-GPIB IEEE-488 Interface Features Completely IEEE 488.2 Compatible Low Power Consumption FIFO's for Increased Performance Maximum Transfer Rates: More than 1.3 Mbytes/s (IEEE 488.1); More than 2.2 Mbytes/s (HS488) PCMCIA Type II Card: PC Card Standard 2.1 Compliant; Low ..
$0.00
Ex Tax:$0.00
National Instruments PMC-GPIB / CPCI-GPIB Interface for PCI Mezzanine Bus Features TNT4882C ASIC Maximum GPIB Transfer Rates PCI-MITE ASIC Completely Software Configurable Plug and Play for Easy Hardware Installation The National Instruments PMC-GPIB / CPCI-GPIB are low-cost, high-performance IEE..
$0.00
Ex Tax:$0.00
description: Shielded Cable Kit for Connecting Nonlatching E Series DAQCards to 68-Pin Accessories Product no longer available after April 30, 2014.. Download PDFs for compatibility charts, more detailed descriptions, and ordering information. Includes a 0.1 m PSHR68-68M adapter cable, PCMCIA strain..
$0.00
Ex Tax:$0.00
National Instruments DAQCard-6533 High-Speed Digital I/O Device Features 20 MHz (80 MB/s) Maximum Transfer Rate 32 Digital (5 V TTL/CMOS) Input / Output Lines 8, 16, or 32-Bit Transfers Start and Stop Triggering, Pattern and Change Detection The National Instruments DAQCard-6533 High-Speed Digita..
$0.00
Ex Tax:$0.00
National Instruments R1005050 Ribbon Cable Features Connects 100-Pin E Series, DIO, and TIO Devices to Standard 50-Pin Third-Party or Custom ConnectorsTerminates with Two 50-Pin IDC ConnectorsVariable Lengths The National Instruments R1005050 Ribbon Cable connects 100-pin E Series, DIO, and TIO d..
$0.00
Ex Tax:$0.00
description: For System Timing and Synchronization Ribbon cables for connecting RTSI bus connectors on adjacent NI plug-in boards. For systems with long and short boards, order the extended RTSI bus cable. Options available to connect from 2 to 5 boards. Download PDFs for compatibility charts, more ..
$0.00
Ex Tax:$0.00
National Instruments SB-MXI Interface Card Features MXIbus Interface for Sun Solaris Conforms to the MXIbus Specification The National Instruments SB-MXI is an interface kit that links any Sun workstation or compatible equipped with SBus expansion slots (referred to as the Sun) directly to the VX..
$0.00
Ex Tax:$0.00
National Instruments SC-2040 Eight-Channel Simultaneous Sample-and-Hold Accessory Features 8 Channel Simultaneously Sampling Differential Amplifier DIP-Switch-Selectable Gain Track and Hold Amplifier The SC-2040 is an eight-channel simultaneously sampling differential amplifier for the National I..
$0.00
Ex Tax:$0.00
National Instruments SC-2042-RTD Eight-Channel RTD Signal Conditioning Accessory Features 8-Channel RTD/ThermistorAccommodate Four-Wire RTD MeasurementsIndependent 1 mA Current Excitation Source per Channel The National Instruments SC-2042-RTD Eight-Channel RTD Signal Conditioning Accessory inter..
$0.00
Ex Tax:$0.00
National Instruments SC-2043-SG Strain Gauge Signal Conditioning Module Features 8-Channel Buffered Single Pole 1.6 kHz Filter Amplifier Gain of 10 Offset Nulling Circuit The National Instruments SC-2043-SG Strain Gauge Signal Conditioning Module is an eight-channel signal conditioning board that..
$0.00
Ex Tax:$0.00
National Instruments SC-205x Series Cable Adapters for Signal Conditioning Features Simple, Flexible Interfaces Cable Adapters for Routing DAQ Device I/O Adapts I/O Signals from Various DAQ Devices The National Instruments SC-205x boards are five cable adapters used with National Instruments anal..
$0.00
Ex Tax:$0.00