SCXI-1163R

National Instruments SCXI-1163R 32-Channel Optically Isolated Solid-State Relay Switch
Features

• 32-Channel Optically Isolated Solid-State Relays
• 2 ms Actuation Time
• Switching Capacity of 200 mA at 240 VDC/Vrms
• Fully Software Programmable
• 8 Banks of 4x1 (1-wire) Multiplexers

The National Instruments SCXI-1163R is a switch module that includes 32 normally open, or Form A, optically isolated solid-state relays which are arranged in 8 banks of 4 relays with one common pole for each bank. This module can be used to switch high-voltage loads up to 240 VAC/VDC and up to 200 mA. The SCXI-1163R is programmed serially over the SCXIbus allowing multiple modules to be easily integrated without additional DAQ devices or cabling. This module can also operate in parallel mode when cabled directly to a plug-in DIO device. 24 of the relays in parallel mode can be controlled with a DIO-24 or all 32 relays in parallel mode with a DIO-32F or DIO-96.

The SCXI-1163R safely isolates the computer from large common-mode voltages, ground loops, and voltage spikes that often occur in industrial and research environments. The solid-state relay channels can be used to switch a wide range of AC and DC voltage and power signals to control field devices.

With the SCXI-1163R, you can use the SCXI chassis as a controller in laboratory testing, production testing, and industrial-process monitoring.
Part Numbers: 182247C-01, 182247D-01, 182634D-01, 182634F-01, 182634G-01