National Instruments AT-CAN Series Controller Area Network (CAN) Interfaces Features One or Two 9-Pin D-Sub ConnectorsHigh Speed CANSeries 1 or 2ISA Form Factor The National Instruments AT-CAN Series Controller Area Network (CAN) Interfaces feature one or two 9-pin d-sub connectors, high speed CA..
$0.00
Ex Tax:$0.00
National Instruments AT-DIO-32F High-Speed 32-Bit Parallel Digital I/O Interface Features Digital I/O ISA Card Number of Channels: 32 I/O Compatibility: TTL Transfer Rate (Programmed I/O): 450 kwords/s The National Instruments AT-DIO-32F is a high-speed, 32-bit, parallel, digital I/O interface. T..
$0.00
Ex Tax:$0.00
National Instruments AT-DIO-32HS High-Speed Digital I/O Board Features 32 (5 V TTL/CMOS) Digital Input/Output Lines 20 MHz (80 Mbytes/s) Maximum Transfer Rate Start and Stop Triggering Pattern and Change Detection The AT-DIO-32HS is part of a family of NI 6533 devices that are parallel digital pa..
$0.00
Ex Tax:$0.00
National Instruments AT-DSP2200 Dynamic Signal Acquisition and DSP Board Features AT&T WE DSP32C DSP Chip 25 MFLOPS of Processing Power The National Instruments AT-DSP2200 is a high-resolution, audio frequency range, analog input/output, and digital signal processing (DSP) board. The AT-DSP2200 i..
$0.00
Ex Tax:$0.00
National Instruments AT-FBUS / AT-FBUS/2 Foundation Fieldbus Interface for ISA Features H1 (31.25 kb/s) InterfaceIntel 80386EX ProcessorYamaha YTZ420 Fieldbus Interface ChipTransformer-Isolated Fieldbus Connection The AT-FBUS is a plug-in board that handles communication between network-configura..
$0.00
Ex Tax:$0.00
National Instruments AT-GPIB GPIB Interface Card for ISA Bus Features ISA to IEEE488.2 Interface GPIB Controller Card Jumper-Selectable Hardware Features The National Instruments AT-GPIB and AT-GPIB/TNT are the older ISA-based GPIB IEEE488.2 interface cards.
AT-GPIB/TNT
The National Instrument..
$0.00
Ex Tax:$0.00
National Instruments AT-GPIB GPIB Interface Card for ISA Bus Features ISA to IEEE488.2 Interface GPIB Controller Card Jumper-Selectable Hardware Features The National Instruments AT-GPIB and AT-GPIB/TNT are the older ISA-based GPIB IEEE488.2 interface cards.
AT-GPIB/TNT
The National Instrument..
$0.00
Ex Tax:$0.00
-atgpibtntplugandplay-250x250.jpg "AT-GPIB/TNT (PLUG AND PLAY)")
National Instruments AT-GPIB GPIB Interface Card for ISA Bus Features ISA to IEEE488.2 Interface GPIB Controller Card Jumper-Selectable Hardware Features The National Instruments AT-GPIB and AT-GPIB/TNT are the older ISA-based GPIB IEEE488.2 interface cards.
AT-GPIB/TNT
The National Instrument..
$0.00
Ex Tax:$0.00
National Instruments AT-MIO-16D Multifunction I/O Board Features Combines the Functionality of the AT-MIO-16 and the PC-DIO-24 Contains Two Logical Sections Timer-Generated Interrupts High-Performance RTSI Bus Interface Full PC AT I/O Channel DMA Capability The National Instruments AT-MIO-16D is ..
$0.00
Ex Tax:$0.00
National Instruments AT-MIO-16DE-10 Multifunction DAQ Features 100 kS/s, 12-bit Resolution 16 Single-Ended Analog Inputs Two 12-bit Analog Output Channels 8 or 32 Digital I/0 Lines (5 V/TTL) Two 24-bit Counter/Timers The National Instruments AT-MIO-16DE-10 DAQ device uses E Series technology to d..
$0.00
Ex Tax:$0.00
National Instruments AT-MIO-16E-1 Multifunction I/O Device Features Software Configurable Analog Input 3 Different Input Modes - NRSE, RSE, and DIFF Analog Output Voltage on 2 Channels Software, External Digital, and Analog Triggering The National Instruments AT-MIO-16E-1 device is one of the fir..
$0.00
Ex Tax:$0.00
National Instruments AT-6020E and AT-MIO-16E-10 Multifunction DAQ Devices Features 12-Bit, 100kS/s 16 Analog Inputs 2 Analog Outputs The National Instruments AT-6020E and AT-MIO-16E-10 Multifunction DAQ Devices use E Series technology to deliver high-performance, reliable data acquisition capabil..
$0.00
Ex Tax:$0.00