The NI FP-TB-2 is a FieldPoint spring-terminal base providing field wiring, module mounting and the communication link between I/O and network modules.
Request current pricing and lead time for this model. Our team will confirm the exact equipment configuration and condition.
Key product information and technical features.
The FP-TB-2 connects FieldPoint I/O modules into a distributed I/O bank. Its spring terminals provide the field-wiring interface; terminal assignments depend on the installed I/O module.
Verified product specifications.
| Numbered field terminals | 32 |
|---|---|
| Dedicated supply terminals | Two V and two C |
| Conductor size | 16–26 AWG |
| Wire strip length | 7 mm |
| Operating temperature | -40 to 70 °C |
| Weight | 160 g |
| Maximum working voltage, channel-to-earth | 250 V, Installation Category II; may vary by I/O module |
| Total current through V and C terminals | Limited to 10 A |
Confirm condition, included accessories and revision before ordering.
Confirmed per unit.
Device / accessories confirmed in quote.
Exact revision confirmed when relevant.
Review system components and compatibility requirements.
Manufacturer
Distributed I/O platform
Terminal base
NI specifies support for all FieldPoint I/O modules; consult each module's wiring instructions.
Manuals, software and technical resources for this model.
Review shipping, warranty and return terms before ordering.
Choose pricing, rental or repair for this exact model.
Product-specific answers based on available technical information.
No. It uses spring terminals; the FP-TB-1 uses screw terminals.
No. NI recommends the isothermal FP-TB-3 for better thermocouple measurement accuracy.