NI SWB-2816B is an NI SwitchBlock matrix module in the SWB-2816 family, identified by NI as the NI 2816B variant of an 8x46, 1-wire reed matrix for SwitchBlock. NI lists the family as an 8x46, 0.3 A reed matrix module and distinguishes the B variant from the A variant by row access: NI 2816B has Row Access = No, while NI 2816A has Row Access = Yes. NI’s Letter of Volatility also confirms the B variant designation as NI 2816B, with board assembly identifier part number 196635A-02L or later.
As a matrix configuration, the module provides 8 rows, 46 columns, and 368 crosspoints using reed, non-latching relays. NI specifies maximum switching current of 0.25 A per channel and maximum carry current of 0.3 A per channel. Maximum switching voltage is 100 VDC or 70 VAC row-to-column, with 100 V, CAT I row/column-to-ground. Maximum switching power is 3 W per channel and 3 W per crosspoint. Typical bandwidth is at least 8 MHz at -3 dB with 50 ohm termination in a column-row-column path.
Electrical characteristics listed by NI include initial DC path resistance below 1 ohm, end-of-life resistance of at least 2 ohms, and open channel resistance greater than 1 × 10^9 ohms. Typical thermal EMF is below 50 microvolts. The module uses a 96-position plastic SCSI I/O connector and is specified at 11.2 cm × 1.2 cm × 17.1 cm with a weight of 320 g. The operating environment is 0 °C to 55 °C and 10% to 90% relative humidity, noncondensing.