National Instruments SWB-2810A product image 1
National Instruments SWB-2810A product image 1 additional viewNational Instruments SWB-2810A product image 1 additional viewNational Instruments SWB-2810A product image 1 additional viewNational Instruments SWB-2810A product image 1 additional viewNational Instruments SWB-2810A product image 1 additional view
6 images: additional views below.Click to enlarge
National Instruments · PXI Platform

NI SWB-2810A

NI SWB-2810A is the Type A configuration of NI’s SWB-2810 SwitchBlock family, a 4x43 reed relay matrix card designed for use in the NI SwitchBlock architecture with the PXI-2800 carrier rather than as a stand-alone module.

ManufacturerNational Instruments
ModelSWB-2810A
Product TypeSwitchBlock relay card / reed matrix module
● Available to Order
Condition: confirmed per unit

Request current pricing and lead time for this model. Our team will confirm the exact equipment configuration and condition.

Fast RFQ

Quote: SWB-2810A

We will reply by email.
Free Shippingfull policy linked
30-Day Warrantystandard coverage
30-Day Returnspolicy applies
Technical Supportmodel & compatibility help
Matrix topology4x43
Relay typeReed
Crosspoints172
Maximum carry current1 A
Maximum switching voltage150 V AC
Switch bandwidth10 MHz
SOHO Assistant
Ask about this exact model, a replacement, accessory, driver, rental or repair question.
Ask about specifications, compatibility, availability, rental or repair.
Ask SOHO Assistant
Overview

Product overview

Key product information and technical features.

NI SWB-2810A belongs to the SWB-2810 SwitchBlock relay card family and is identified by NI as the Type A variant that may appear in software as NI 2810A. NI’s official model information describes the base SWB-2810 family as a 4x43, 1 A reed matrix module for SwitchBlock, while the certification listing distinguishes the specific NI 2810A and NI 2810B configurations by part number and naming. https://www.ni.com/en/shop/hardware/switches/model-swb-2810 https://www.ni.com/en/support/documentation/product-certifications/model.swb-2810.html

This card is a primary SwitchBlock relay module, not a stand-alone DAQ or switching device. NI states that SwitchBlock modules require a PXI Carrier Module for use in a PXI chassis and cannot operate independently. The NI SwitchBlock Getting Started Guide further states that the carrier is the NI PXI-2800 and that one carrier can hold up to six NI SwitchBlock relay cards. https://www.ni.com/en/support/documentation/cable-accessory-guide/ni-switches-cable-and-accessory-compatibility/switchblock-modules--switches-cable-and-accessory-compatibility.html https://download.ni.com/support/manuals/375402a.pdf

For the NI 2810 relay card, NI specifies a 4x43 reed matrix with 172 crosspoints, 150 V maximum switching voltage, 1 A maximum current, 20 W maximum switching power, 10 MHz bandwidth, and use of one relay-card slot in the SwitchBlock carrier. NI also documents scalable matrix expansion within the SwitchBlock architecture, including 4x258 in a single six-card carrier and 4x1032 in a PXI chassis populated with four carriers. https://www.ni.com/en/shop/hardware/switches/model-swb-2810 https://www.ni.com/en/support/documentation/supplemental/10/ni-switchblock-hardware-architecture.html

  • Type A configuration of the SWB-2810 SwitchBlock relay card family, appearing in software as NI 2810A.
  • 4x43 reed relay matrix architecture.
  • 172 crosspoints.
  • Type A front connector access includes matrix columns plus the analog bus.
  • Uses one relay-card slot in the SwitchBlock carrier.
Verified specifications

Technical data

Verified product specifications.

Matrix topology4x43
Relay typeReed
Crosspoints172
Maximum carry current1 A
Maximum switching voltage150 V AC
Switch bandwidth10 MHz
Maximum switching power20 W
Relay card slots used1
Connector typeCustom
Condition & included items

What the actual unit includes

Confirm condition, included accessories and revision before ordering.

Condition

Confirmed per unit.

Included

Device / accessories confirmed in quote.

Revision

Exact revision confirmed when relevant.

Compatibility

Complete the measurement chain

Review system components and compatibility requirements.

National Instruments

Manufacturer

PXI Platform

Platform

SWB-2810A

SwitchBlock relay card / reed matrix module

Interface

NI SwitchBlock via PXI-2800 carrier

Manuals & software

Technical resources

Manuals, software and technical resources for this model.

Shipping, warranty & returns

Commercial terms

Review shipping, warranty and return terms before ordering.

Shipping
Free Shipping. Full policy terms apply.
Warranty
30-Day Warranty. Standard coverage applies.
Returns
30-Day Returns. Return policy applies.
Price / Availability
Contact SOHO ProLab for current quote and availability.
Lifecycle services

Source, rent or repair the exact model

Choose pricing, rental or repair for this exact model.

Explore equipment

Test Equipment Parts & Accessories

Shipping, warranty and returns

FAQ

Product-specific questions

Product-specific answers based on available technical information.

Is NI SWB-2810A a stand-alone switching module?

No. NI states that SwitchBlock modules require a PXI Carrier Module in a PXI chassis and cannot be used without the PXI Carrier Module for SwitchBlock.

What is the difference between NI 2810A and NI 2810B?

According to NI, Type A provides access to the columns plus the analog bus on the front connector, while Type B provides columns only and does not connect the analog bus to the front panel.

What carrier is used with the SWB-2810 family?

The NI SwitchBlock Getting Started Guide identifies the NI PXI-2800 as the carrier for NI SwitchBlock relay cards.

Ask SOHO AssistantProduct & compatibility help