NI CRIO-FRC-II

The documented hardware format is a 4-slot integrated CompactRIO chassis/controller with module positions labeled 1 through 4. Official NI documentation for the related cRIO-9075/9076 family shows an RJ-45 Ethernet port and an RS-232 serial port, and specifies a 9 V to 30 V input range, 15 W maximum power consumption, and a recommended 24 W, 24 VDC power supply. Dimensional figures in the same manual show an enclosure approximately 178.1 mm long, 88.1 mm high, and 74.0 mm deep.

For configuration assessment, the most important distinction is USB. The cRIO-9075/9076 manual shows a USB port on cRIO-9076 only, while the NI FRC FAQ explicitly says the FRC II cRIO is almost the same hardware as the NI 9076 minus USB. Because NI did not provide a standard commercial product page for the exact FRC-branded variant in the supplied sources, the FRC-II should be cataloged as a special-purpose controller derived from the cRIO-9076 platform rather than asserted as a standard 9076 SKU.