National Instruments SCB-100A product image 1
National Instruments SCB-100A product image 1 additional viewNational Instruments SCB-100A product image 1 additional viewNational Instruments SCB-100A product image 1 additional viewNational Instruments SCB-100A product image 1 additional viewNational Instruments SCB-100A product image 1 additional view
8 images: additional views below.Click to enlarge
National Instruments · NI data acquisition and digital I/O accessories

NI SCB-100A

NI SCB-100A is a National Instruments shielded I/O connector block designed as a 100-pin shielded screw terminal DAQ accessory for signal breakout from compatible NI devices that use a 100-pin 0.050 series shielded D-type I/O connector.

ManufacturerNational Instruments
ModelSCB-100A
Product TypeShielded I/O connector block
● Available to Order
Condition: confirmed per unit

Request current pricing and lead time for this model. Our team will confirm the exact equipment configuration and condition.

Fast RFQ

Quote: SCB-100A

We will reply by email.
Free Shippingfull policy linked
30-Day Warrantystandard coverage
30-Day Returnspolicy applies
Technical Supportmodel & compatibility help
ManufacturerNational Instruments
ModelSCB-100A
Official part number785024-01
Product typeShielded I/O connector block
Accessory type100-Pin Shielded Screw Terminal DAQ Accessory
Back-end connector100-Pin, Female SCSI Type
SOHO Assistant
Ask about this exact model, a replacement, accessory, driver, rental or repair question.
Ask about specifications, compatibility, availability, rental or repair.
Ask SOHO Assistant
Overview

Product overview

Key product information and technical features.

NI SCB-100A is a National Instruments shielded I/O connector block, identified by NI as a 100-pin shielded screw terminal DAQ accessory rather than a primary DAQ or DIO module. NI describes it as a 100-pin female SCSI to 100-pin female screw terminal connector block for interfacing field wiring to supported NI hardware with matching 100-pin connectors. The confirmed official model is SCB-100A, with part number 785024-01 listed on NI product and certification pages.

The SCB-100A provides 100 screw terminals and a shielded enclosure for organized signal termination. NI also notes a magnetic removable lid with pinout diagrams, which helps with channel identification during installation and service. For physical integration, NI lists panel, wall, and DIN rail mounting options, and the accessory guide gives compact overall dimensions of 14.7 cm width, 14.7 cm depth, and 3.0 cm height.

Within the SCB family, NI clearly distinguishes the SCB-100A from the older SCB-100. According to NI, the SCB-100A succeeded the SCB-100 in 2017, but it does not include the older unit’s MIO functionality, breadboard area, DIP switches, or thermocouple support. NI further specifies that SCB-100A operates in direct feedthrough mode only, making it best suited when a straightforward shielded terminal breakout is required instead of onboard signal conditioning or configuration features.

  • NI identifies SCB-100A as a shielded I/O connector block and a 100-pin shielded screw terminal DAQ accessory.
  • Provides a 100-pin female SCSI to 100-pin female screw terminal connection format.
  • Includes 100 screw terminals for signal connection.
  • Uses a shielded enclosure with a magnetic removable lid that includes pinout diagrams.
  • Supports panel, wall, and DIN rail mounting.
  • Direct feedthrough mode only; no MIO functionality, no breadboard area, no DIP switches, and no thermocouple support.
Verified specifications

Technical data

Verified product specifications.

ManufacturerNational Instruments
ModelSCB-100A
Official part number785024-01
Product typeShielded I/O connector block
Accessory type100-Pin Shielded Screw Terminal DAQ Accessory
Back-end connector100-Pin, Female SCSI Type
Connector format100-pin 0.050 SCSI D-Type Connector Female (Receptacle)
Connector positions100-position 0.050 D-Type
Terminal count100 screw terminals
Width14.7 cm
Depth14.7 cm
Height3.0 cm
Hazardous voltage limitDo not connect above 30 V RMS / 42 V peak / 60 V DC
Condition & included items

What the actual unit includes

Confirm condition, included accessories and revision before ordering.

Condition

Confirmed per unit.

Included

Device / accessories confirmed in quote.

Revision

Exact revision confirmed when relevant.

Compatibility

Complete the measurement chain

Review system components and compatibility requirements.

National Instruments

Manufacturer

NI data acquisition and digital I/O accessories

Platform

SCB-100A

Shielded I/O connector block

Interface

100-pin 0.050 SCSI D-Type female receptacle to 100 screw terminals

Manuals & software

Technical resources

Manuals, software and technical resources for this model.

Shipping, warranty & returns

Commercial terms

Review shipping, warranty and return terms before ordering.

Shipping
Free Shipping. Full policy terms apply.
Warranty
30-Day Warranty. Standard coverage applies.
Returns
30-Day Returns. Return policy applies.
Price / Availability
Contact SOHO ProLab for current quote and availability.
Lifecycle services

Source, rent or repair the exact model

Choose pricing, rental or repair for this exact model.

Explore equipment

Test Equipment Parts & Accessories

Shipping, warranty and returns

FAQ

Product-specific questions

Product-specific answers based on available technical information.

Is the SCB-100A a DAQ module or an accessory?

NI identifies the SCB-100A as a shielded I/O connector block and a 100-pin shielded screw terminal DAQ accessory, not as a primary DAQ or digital I/O module.

How does SCB-100A differ from the older SCB-100?

NI states that SCB-100A succeeded SCB-100 in 2017 and that SCB-100A has no MIO functionality, no breadboard area, no DIP switches, direct feedthrough mode only, and no thermocouple support.

What connector does the SCB-100A use?

NI specifies a 100-pin female SCSI type connection and identifies the mating interface as a 100-pin 0.050 SCSI D-Type female receptacle.

Can hazardous voltages be connected to the SCB-100A?

No. NI safety guidance states not to connect hazardous voltages above 30 V RMS, 42 V peak, or 60 V DC.

Ask SOHO AssistantProduct & compatibility help